Ningbo Minsheng Machinery Co.,Ltd
Call us on:0086-13777-020080   E-mail: sales.mscnc@hotmail.com
News
Home > News > Content
CNC Drilling Machine Use Points
Edit: Ningbo Minsheng Machinery Co.,Ltd    Date: Jun 01, 2017

CNC drilling machine, its application, mainly used for some drilling operation, in addition, you can also reaming, reaming and tapping, etc., which are also possible to achieve. However, in terms of CNC drilling machine, which is mainly drilling, so in a variety of large parts, the drilling operation, then it is a CNC drilling machine, because of its good results, so by the user.

Among the many products on the site, one is more important, it is CNC drilling machine. So, its learning will continue. And, by constantly learning, we can come to supplement their knowledge in this area, so as to know and know more, so you can benefit from, and still the more the better. So, on the basis of these benefits, there is no reason why you should take it seriously and do not regret it.

1. CNC drilling machine use points

(1) the use of CNC drilling machine environment, there should be no vibration and electromagnetic interference, and the temperature should not be too large.

(2) its power supply, but also has a corresponding use requirements, should be strictly abide by.

(3) the relevant operating personnel to be trained, to posts, so as not to damage the equipment.

(4) the use of equipment, maintenance, etc., should be a good record for later check.

2. CNC system maintenance

(1) strictly abide by and implement the requirements, do routine maintenance work.

(2) to avoid the dust into the CNC device, because it will make the insulation resistance between components down, and then failure, or even damage the components.

(3) the voltage of the CNC system, etc., should always be viewed, whether it is within the specified rated range, whether there are abnormalities.

3. Pneumatic system maintenance

(1) compressed air, there should be no moisture and impurities. For pneumatic components, etc., to regularly check and replace.

(2) work pressure to adjust to the appropriate, but also pay attention to the system's sealing performance to maintain good.

(3) pay attention to the oil mist oil supply, should be sufficient, the amount of time to add.

The above three points of knowledge in the NC drilling machine is very important aspect. Therefore, we hope that we can understand and master the time, and can be used in practice in practice. For more information on this product, we can click to view Wuxi Xinghai Wang CNC drilling machine products, welcome to come to the Advisory and purchase.


Product Categories

Fast Track

  • Feedback
    Ningbo Minsheng Machinery Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: Lingxu Er Road, Binhai Industrial Zone, Cixi District, Ningbo City, China
    Tel: 0086-13777-020080    
    Fax: +86-574-63970895    
    E-mail: sales.mscnc@hotmail.com
Copyright © Ningbo Minsheng Machinery Co.,Ltd