Ningbo Minsheng Machinery Co.,Ltd
Call us on:0086-13777-020080  E-mail:
Home > News > Content
CNC Engraving Machine The Correct Use Of The Way
Ningbo Minsheng Machinery Co.,Ltd | Updated: Jun 13, 2017

CNC engraving machine is widely used, but after the failure of the problem, so many customers helpless. In general, CNC engraving machine spindle and other accessories will not be a problem, mostly due to improper operation caused by engraving machine damage, so learn how to control CNC engraving machine is the most important, in fact, many reasons as long as familiar with the engraving machine, Will soon be able to determine the cause of the failure.

1, the spindle does not work properly, first check the inverter LED display error code (see inverter manual error code entry).

2, three axes in a shaft can not move, then check the corresponding axis of the corresponding drive block is damaged. Check the method can be used to replace the fixed axis of the corresponding air plug unplugged in the other active shaft on the corresponding drive.

3, if the switch does not move the axis of normal, it can be explained that the corresponding drive block is damaged, you need to replace the drive block, if not move the axis or not to explain the cable or motor failure to replace the cable or motor. Three axes can not move, then check whether the three-axis aviation plug and control box is connected, the control box power is open, whether the data cable and the control box and the computer host control card connected. If the above are normal, please contact the engraving machine factory.

Carving from the processing principle is a kind of drilling and milling combined processing, engraving machine a variety of data input mode according to the needs of its capability. Computer engraving machine has two types of laser engraving and mechanical engraving, both of which have high power and low power points. Because the scope of application of the engraving machine is very wide, it is necessary to understand the most suitable application range of various engraving machines. Small power is only suitable for two-color panels, architectural models, small signs, three-dimensional crafts, etc., because the power is too small and greatly affected the scope of its application. High-power engraving machine can do things with low-power engraving machine, the most suitable for large-scale cutting, relief, carving.

Product Categories

Fast Track

Copyright © Ningbo Minsheng Machinery Co.,Ltd